GM Saginaw Power Steering Pump Double-Groove Aluminum Pulley - Satin
This satin aluminum double-groove pulley is built for GM Saginaw-style power steering pumps using a 5/8" keyway shaft. It bolts onto the pump's keyed shaft and provides two V-belt grooves, so it can drive the power steering pump and one additional accessory — such as an alternator — off a single belt run.
This pulley is a keyway-attachment part only. It is not compatible with press-on/press-fit pump shafts found on later Saginaw pumps. Confirm your pump has a keyed shaft (common on Saginaw P-series pumps from roughly 1964–1974) before ordering, since the two shaft styles are not interchangeable.
Hardware is not included and the pulley is sold individually. Outside diameter is 5.750", with a standard V-belt profile designed to match factory and aftermarket keyway-shaft Saginaw pump applications.
Applications
Fits GM Saginaw-style power steering pumps with a 5/8" keyway shaft, commonly found on GM vehicles from roughly 1964–1974, including Camaro, Chevelle, Nova, C10, and GMC C/K trucks equipped with this pump style.
Installation
Slides onto the pump's keyed shaft and is secured with a retaining nut (hardware not included). Confirm pulley offset and belt alignment against your accessory drive setup before installation, since bracket and pump spacing vary by application.
Shaft Compatibility
Keyway attachment only. Press-on/press-fit shaft pumps (common from the mid-1970s onward) require a press-on pulley and are not compatible with this part.
COMPATIBLE WITH
• GM Saginaw power steering systems
• GM hydraulic steering pump applications
• Custom street and performance steering setups
• Aftermarket accessory drive systems
NOTES
Verify pump shaft diameter, press-fit or keyed attachment, pulley offset, and belt alignment before installation.
COMMON VEHICLE APPLICATIONS
- Chevrolet Camaro (1967–1974)
- Chevrolet Chevelle (1964–1973)
- Chevrolet Nova (1964–1974)
- Chevrolet C10 (1964–1974)
- GMC C/K Series (1964–1974)
SPECIFICATIONS
Pump Style: Saginaw
Pulley Style: V-Belt
Groove Quantity: 2
Pulley Attachment: Keyway
Keyway Bore: 5/8"
Pulley Material: Aluminum
Outside Diameter: 5.750"
Underdrive: No
Overdrive: No
Hardware: Not Included
Quantity: Sold Individually
GM Saginaw Power Steering Pump Double-Groove Aluminum Pulley - Satin
This satin aluminum double-groove pulley is built for GM Saginaw-style power steering pumps using a 5/8" keyway shaft. It bolts onto the pump's keyed shaft and provides two V-belt grooves, so it can drive the power steering pump and one additional accessory — such as an alternator — off a single belt run.
This pulley is a keyway-attachment part only. It is not compatible with press-on/press-fit pump shafts found on later Saginaw pumps. Confirm your pump has a keyed shaft (common on Saginaw P-series pumps from roughly 1964–1974) before ordering, since the two shaft styles are not interchangeable.
Hardware is not included and the pulley is sold individually. Outside diameter is 5.750", with a standard V-belt profile designed to match factory and aftermarket keyway-shaft Saginaw pump applications.
Applications
Fits GM Saginaw-style power steering pumps with a 5/8" keyway shaft, commonly found on GM vehicles from roughly 1964–1974, including Camaro, Chevelle, Nova, C10, and GMC C/K trucks equipped with this pump style.
Installation
Slides onto the pump's keyed shaft and is secured with a retaining nut (hardware not included). Confirm pulley offset and belt alignment against your accessory drive setup before installation, since bracket and pump spacing vary by application.
Shaft Compatibility
Keyway attachment only. Press-on/press-fit shaft pumps (common from the mid-1970s onward) require a press-on pulley and are not compatible with this part.
COMPATIBLE WITH
• GM Saginaw power steering systems
• GM hydraulic steering pump applications
• Custom street and performance steering setups
• Aftermarket accessory drive systems
NOTES
Verify pump shaft diameter, press-fit or keyed attachment, pulley offset, and belt alignment before installation.
COMMON VEHICLE APPLICATIONS
- Chevrolet Camaro (1967–1974)
- Chevrolet Chevelle (1964–1973)
- Chevrolet Nova (1964–1974)
- Chevrolet C10 (1964–1974)
- GMC C/K Series (1964–1974)
SPECIFICATIONS
Pump Style: Saginaw
Pulley Style: V-Belt
Groove Quantity: 2
Pulley Attachment: Keyway
Keyway Bore: 5/8"
Pulley Material: Aluminum
Outside Diameter: 5.750"
Underdrive: No
Overdrive: No
Hardware: Not Included
Quantity: Sold Individually
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This satin aluminum double-groove pulley is built for GM Saginaw-style power steering pumps using a 5/8" keyway shaft. It bolts onto the pump's keyed shaft and provides two V-belt grooves, so it can drive the power steering pump and one additional accessory — such as an alternator — off a single belt run.
This pulley is a keyway-attachment part only. It is not compatible with press-on/press-fit pump shafts found on later Saginaw pumps. Confirm your pump has a keyed shaft (common on Saginaw P-series pumps from roughly 1964–1974) before ordering, since the two shaft styles are not interchangeable.
Hardware is not included and the pulley is sold individually. Outside diameter is 5.750", with a standard V-belt profile designed to match factory and aftermarket keyway-shaft Saginaw pump applications.
Applications
Fits GM Saginaw-style power steering pumps with a 5/8" keyway shaft, commonly found on GM vehicles from roughly 1964–1974, including Camaro, Chevelle, Nova, C10, and GMC C/K trucks equipped with this pump style.
Installation
Slides onto the pump's keyed shaft and is secured with a retaining nut (hardware not included). Confirm pulley offset and belt alignment against your accessory drive setup before installation, since bracket and pump spacing vary by application.
Shaft Compatibility
Keyway attachment only. Press-on/press-fit shaft pumps (common from the mid-1970s onward) require a press-on pulley and are not compatible with this part.
COMPATIBLE WITH
• GM Saginaw power steering systems
• GM hydraulic steering pump applications
• Custom street and performance steering setups
• Aftermarket accessory drive systems
NOTES
Verify pump shaft diameter, press-fit or keyed attachment, pulley offset, and belt alignment before installation.
COMMON VEHICLE APPLICATIONS
- Chevrolet Camaro (1967–1974)
- Chevrolet Chevelle (1964–1973)
- Chevrolet Nova (1964–1974)
- Chevrolet C10 (1964–1974)
- GMC C/K Series (1964–1974)
SPECIFICATIONS
Pump Style: Saginaw
Pulley Style: V-Belt
Groove Quantity: 2
Pulley Attachment: Keyway
Keyway Bore: 5/8"
Pulley Material: Aluminum
Outside Diameter: 5.750"
Underdrive: No
Overdrive: No
Hardware: Not Included
Quantity: Sold Individually
