Ford 5.0L EFI GT40 Intake Manifold Phenolic Spacer Gasket
The TSP Ford 5.0L EFI GT40 Intake Manifold Phenolic Spacer Gasket is an individual fiber gasket sized for the GT40 phenolic spacer used between the GT40 intake manifold and cylinder heads on 1986-1993 Ford 5.0L EFI small block Windsor V8 engines. Fiber construction seals the mating surfaces, supporting the phenolic spacer's heat-isolation function.
This gasket is sold individually, making it a straightforward way to replace a gasket damaged during installation or removal without buying an entire spacer and hardware kit again. Before installing, confirm the gasket's bolt pattern and port alignment match your GT40 intake and spacer.
This gasket is intended for use with TSP's GT40 phenolic spacer kits for the Ford small block Windsor V8 — 4.9L / 302 CID (5.0L) — equipped with a GT40 intake manifold, 1986-1993. It's found in Ford Mustang, F-100, Bronco, Mercury Cougar, and Ford Fairlane applications running this engine and intake combination.
Material & Fit
Fiber construction seals the mating surface between the GT40 intake and the phenolic spacer, supporting the spacer's heat-isolation function.
Installation
Sold individually. Confirm bolt pattern and port alignment against your GT40 intake and spacer before installing.
COMPATIBLE WITH
FORD SMALL BLOCK WINDSOR V8
• 4.9 L / 302 in3 generally referred to as 5.0 L
NOTES
• Replacement gasket for Ford 5.0L EFI GT40 intake manifold phenolic spacer applications — sold individually.
• Fits 1986–1993 Ford 5.0L EFI engines equipped with a GT40 upper/lower intake manifold only — not compatible with standard factory EFI upper intake manifolds.
• Fiber construction provides a reliable seal between the phenolic spacer and the GT40 intake manifold.
• Two gaskets are required per installation — order accordingly.
COMMON VEHICLE APPLICATIONS
Ford Mustang GT / Cobra (5.0L GT40, 1993–1995)
Ford Explorer (5.0L GT40, 1993–1994)
Mercury Mountaineer (5.0L GT40, 1993–1994)
SPECIFICATIONS:
Material: Fiber
Quantity: Sold Individually
Original: $9.00
-65%$9.00
$3.15Ford 5.0L EFI GT40 Intake Manifold Phenolic Spacer Gasket
The TSP Ford 5.0L EFI GT40 Intake Manifold Phenolic Spacer Gasket is an individual fiber gasket sized for the GT40 phenolic spacer used between the GT40 intake manifold and cylinder heads on 1986-1993 Ford 5.0L EFI small block Windsor V8 engines. Fiber construction seals the mating surfaces, supporting the phenolic spacer's heat-isolation function.
This gasket is sold individually, making it a straightforward way to replace a gasket damaged during installation or removal without buying an entire spacer and hardware kit again. Before installing, confirm the gasket's bolt pattern and port alignment match your GT40 intake and spacer.
This gasket is intended for use with TSP's GT40 phenolic spacer kits for the Ford small block Windsor V8 — 4.9L / 302 CID (5.0L) — equipped with a GT40 intake manifold, 1986-1993. It's found in Ford Mustang, F-100, Bronco, Mercury Cougar, and Ford Fairlane applications running this engine and intake combination.
Material & Fit
Fiber construction seals the mating surface between the GT40 intake and the phenolic spacer, supporting the spacer's heat-isolation function.
Installation
Sold individually. Confirm bolt pattern and port alignment against your GT40 intake and spacer before installing.
COMPATIBLE WITH
FORD SMALL BLOCK WINDSOR V8
• 4.9 L / 302 in3 generally referred to as 5.0 L
NOTES
• Replacement gasket for Ford 5.0L EFI GT40 intake manifold phenolic spacer applications — sold individually.
• Fits 1986–1993 Ford 5.0L EFI engines equipped with a GT40 upper/lower intake manifold only — not compatible with standard factory EFI upper intake manifolds.
• Fiber construction provides a reliable seal between the phenolic spacer and the GT40 intake manifold.
• Two gaskets are required per installation — order accordingly.
COMMON VEHICLE APPLICATIONS
Ford Mustang GT / Cobra (5.0L GT40, 1993–1995)
Ford Explorer (5.0L GT40, 1993–1994)
Mercury Mountaineer (5.0L GT40, 1993–1994)
SPECIFICATIONS:
Material: Fiber
Quantity: Sold Individually
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The TSP Ford 5.0L EFI GT40 Intake Manifold Phenolic Spacer Gasket is an individual fiber gasket sized for the GT40 phenolic spacer used between the GT40 intake manifold and cylinder heads on 1986-1993 Ford 5.0L EFI small block Windsor V8 engines. Fiber construction seals the mating surfaces, supporting the phenolic spacer's heat-isolation function.
This gasket is sold individually, making it a straightforward way to replace a gasket damaged during installation or removal without buying an entire spacer and hardware kit again. Before installing, confirm the gasket's bolt pattern and port alignment match your GT40 intake and spacer.
This gasket is intended for use with TSP's GT40 phenolic spacer kits for the Ford small block Windsor V8 — 4.9L / 302 CID (5.0L) — equipped with a GT40 intake manifold, 1986-1993. It's found in Ford Mustang, F-100, Bronco, Mercury Cougar, and Ford Fairlane applications running this engine and intake combination.
Material & Fit
Fiber construction seals the mating surface between the GT40 intake and the phenolic spacer, supporting the spacer's heat-isolation function.
Installation
Sold individually. Confirm bolt pattern and port alignment against your GT40 intake and spacer before installing.
COMPATIBLE WITH
FORD SMALL BLOCK WINDSOR V8
• 4.9 L / 302 in3 generally referred to as 5.0 L
NOTES
• Replacement gasket for Ford 5.0L EFI GT40 intake manifold phenolic spacer applications — sold individually.
• Fits 1986–1993 Ford 5.0L EFI engines equipped with a GT40 upper/lower intake manifold only — not compatible with standard factory EFI upper intake manifolds.
• Fiber construction provides a reliable seal between the phenolic spacer and the GT40 intake manifold.
• Two gaskets are required per installation — order accordingly.
COMMON VEHICLE APPLICATIONS
Ford Mustang GT / Cobra (5.0L GT40, 1993–1995)
Ford Explorer (5.0L GT40, 1993–1994)
Mercury Mountaineer (5.0L GT40, 1993–1994)
SPECIFICATIONS:
Material: Fiber
Quantity: Sold Individually
